Puffco Peak Smart Rig


In Stock

SKU: f7ea18a54269 Categories ,


Puffco Peak Smart Rig

Experience an entirely new way of vaping your cannabis concentrates with the Puffco Peak Smart Rig. The unique cone-shaped design, spectacular taste experience, and innovative features will leave you speechless. Take consuming your concentrates to the next level with the Puffco Peak, the first desktop vaporizer with water filtration. The Puffco Peak e-rig features an innovative design that combines the control of an e-nail with the dabbing experience and water filtration of a dab rig, hence the name e-rig. The Puffco Peak will provide you with the purest, smoothest, and cleanest flavor experience due to its ceramic bowl that evenly heats your concentrates and added water filtration.

How to use the Puffco Peak

The Peak has an easy learning curve. To use, first take the glass attachment off and fill it with water just above the air holes. Place it back onto the base and turn the device on by holding the power button three seconds in a row. The Puffco Peak features four temperature settings from small to extra large loads: blue 232 °C / 450 °F (low), green 260 °C / 500 °F (medium), orange 287 °C / 550 °F (high) and gray 315 °C / 600 °F (peak). Press the power button to switch between temperature settings. The LED light band indicates the heat cycle it is on. Then, you can insert your favorite concentrate in the ceramic bowl for it to vaporize. Now all you have to do is to sit back and enjoy your concentrate. 

Puffco Peak heat time

The Puffco Peak has a rapid heat-up time of about 20 – 25 seconds, depending on the setting you have chosen. It also features intelligence temperature calibration, which means that the temperature automatically adjusts while the bowl is still hot, for a consistent hit, every time. When the desired temperature has been reached, simply place your cannabis concentrate of choice in the ceramic bowl with the included dab tool, place the carb cap on the bowl, and start vaping.

Sesh mode

The Puffco Peak also features a sesh mode that is activated by pushing the button twice. Heat is increased, and the session is extended by 15 seconds, which gives you plenty of time to share a dab with your favorite dab buddy!

How long does the battery last?

The powerful battery provides around 30 dabs on a single load. The Puffco Peak will automatically turn itself off after 10 seconds to preserve the battery. You can easily reactivate the device by a double click on the power button. Once your Puffco Peak battery is empty, it charges fully in 2 hours when using the supercharger.

How to clean a Puffco Peak?

Cleaning your Puffco Peak isn’t a hard thing to do, as long as you know what you’re doing. Follow our instructions for cleaning your Puffco Peak

Pros and cons of a Puffco Peak


  • It has an easy-to-use interface that makes vaping simple and fun, including battery and heat cycle indicators.
  • You can easily adjust the temperature control by scrolling through the preset heat settings.
  • It has a built-in battery, which means no need to charge or replace batteries.
  • The average heat-up time is only 20 seconds.
  • The device has haptic feedback to keep your timing spot-on for the perfect hit.


  • Pricey compared to other vaporizers, bongs or bubblers.
  • Doesn’t have a digital display.
  • Not portable like a vape pen

Puffco Peak Vaporizer is worth every penny. It offers great functionality at a reasonable price point. We also love how compact and stylish it looks, making it a good choice for those who enjoy discreet consumption. Also take a look at other Puffco products, including the Puffco Peak Pro Smart Rig and the Puffco Plus 

What’s in the box of this Puffco Peak:

  • 1 x Puffco Peak
  • 1 x Carrying case
  • 1 x Pack of cleaning swabs
  • 1 x Loading tool / Dabber tool
  • 1 x Micro USB cable
  • 1 x EU wall adapter
  • 1 x US wall adapter
  • 1 x Carb cap
  • 1 x Extra removable ceramic bowl
  • 1 x Tether

Puffco Peak FAQ

How do I use my Puffco Peak?

  1. Make sure that your Peak is fully charged before your first use. The white light on the unit will pulse while it’s charging and will automatically turn off once fully charged. The Peak should take about 2.5 hours to fully charge. Use only the micro USB charger included with your Peak to do so, using different charging bricks can potentially damage the device and will void your warranty.
  2. Fill the glass attachment with water, just above the air-holes. Do not allow any water in the lower section of the glass (see included instructions for details) and do not fill the glass attachment water while attached to the base.
  3. You can then attach the glass to the base of the Peak, aligning the inlet hole on the front of the glass with the atomizer. Then carefully push the front of the glass into the base, then the back.
  4. To lock/unlock the device, hold down the button for 3-5 seconds.
  5. Single-click to toggle through heat settings; BLUE-GREEN-RED-WHITE
  6. Use a loading tool to place contents on the bottom surface of the bowl.
  7. Place carb cap on top of the atomizer.
  8. Double click to initiate heat-up; the device will take about 20 seconds to heat up fully. Press & hold the button at any point to exit the heating cycle.
  9. The device will vibrate and lights will flash 3 times when ready for use.
  10. Use a cotton swab to clean the bowl after each use.

How do I load my Puffco Peak?

Use the loading tool included with your Peak to transfer your product into the bowl of the atomizer. Always be sure to load the contents onto the bottom of the bowl rather than along the sidewalls of the bowl for the optimal experience. Once the atomizer has been loaded you can double click the button to engage the heating element and place the carb cap on the top of the atomizer. You can also load your product while the atomizer is warm as you would with a traditional rig.

Can I Use Any Micro USB Charger To Charge My Peak?

While it’s okay to use a different charging cable to charge your Peak base, we never suggest using a different adapter, charging brick, power dock, USB C charger, or car charger. PLEASE KEEP IN MIND THAT DOING SO CAN POTENTIALLY DAMAGE THE PRODUCT AND WILL VOID YOUR WARRANTY.

How Long Should My Peak Battery Last?

A fully charged Peak battery should last about 30 heating cycles before needing to be recharged. Please keep in mind that using “Sesh Mode” often will deplete battery life quicker. Don’t forget to shut the device off between uses to preserve battery life. The battery will slowly deplete even when not in use. To check your battery life click the button 3 times. The color will indicate how much battery life remains before the device needs to be recharged: Green (100% – 60%) – Yellow (60% – 30%) – Red (30% – 0%)

What is Sesh Mode?

The Sesh Mode functionality feature enables you to increase heat and extend your session by 15 seconds mid-cycle. This can be helpful if you’ve loaded too much material and you’re in need of a temperature boost, or just looking to share with a friend. Simply double click while in use and the heat will automatically increase and your cycle will extend. Still not enough? Double click as many times as you want to keep the session going!

What Is The Best Way To Attach/Detach The Atomizer To The Base?

We always suggest that you attach/detach the atomizer to and from the base fully assembled, with the atomizer jacket on. The top of the Peak atomizer has notches that lock the jacket into place, making it very difficult to fully attach the atomizer without it attached.

Whenever I Use My Peak I Hear A Buzzing Sound, Is That Normal?

Yes, a light buzzing is completely normal when the heating element is engaged and is always more apparent and noticeable when the carb cap is removed.

Custom FAQs Tab
Puffco Peak Smart Rig
Puffco Peak Smart Rig